waterbannerFind us on Facebook
About UsLatest NewsOur AgentsIonisationWater ChemistryOur ProductsGalleryTestimonials

Our Products

Further information about our products and for ordering our products, please email John Horwood at AquaVic.

A. Aquavic “New Millennium” Series II

This electronic module features an onboard master timer which controls the filtration pump, the auxiliary output, and the ioniser. A secondary timer controls the actual ioniser running time thus giving absolute control over the effective copper levels in your pool.

A Bypass switch is provided for running the system at times other than those programmed i.e for backwashing filters etc. All functions are monitored by a colour-coded LED display.

Capacity

10, 000 litres to 100, 000 litres

B. Aquavic “New Millennium” Series II (T)

This electronic module features an onboard master timer which controls the filtration pump, the auxiliary output, and the ioniser. A secondary timer controls the actual ioniser running time thus giving absolute control over the effective copper levels in your pool.

A Bypass switch is provided for running the system at times other than those programmed i.e for backwashing filters etc. All functions are monitored by a colour-coded LED display.

Capacity

100,000 litres to 250,000 litres

C. Aquavic “New Millennium” Series 1

These basic no frills units are the "beating heart" of our best selling ioniser package. They are ideal for swim spas, plunge pools, above-ground kit pools and the DIY market.

They are also an ideal drop-in replacement for the failed control units of other manufacturers, and for controlling algae in water features, ponds, and ornamental fountains.

Capacity

1,000 litres to 40,000 litres

D. Aquavic Universal C-40M & C-50M Flowcells

Flowcells are a vital of all ioniser packages as they house the electrodes. Unlike those of other manufacturers, ours are extremely robust and compact with a straight-through flow line that ensures minimum turbulence and maximum fluidic efficiency.

The clear centre section facilitates anytime monitoring of the condition of both electrodes, and they are demountable for electrode replacement.

They are supplied to suit 40-mm or 50-mm PVC pipework.

They are rated at twice the working pressure encountered on a typical pool filtration system.

 

E. Aquavic “Next Generation” Flowcell

Pictured here is the prototype of the next generation of compact flowcells. Although marginally smaller than the older C-40M and C-50M universal flowcells, it retains their clear centre section and demountable capability – but as it is rated at twice the working pressure, it is far more versatile and therefore has a wider range of applications.

F. Aquavic Flanged Flowcell

This particular unit which is rated at 1000 kPa is a typical example of Aquavic's ability to design and build equipment to suit a customer's specific application. The flanged ends and the tie rods of this 50-mm flowcell confirm that it was not designed for the modest flow rates and low pressures usually associated with domestic facilities.

G. Aquavic KS2-M Industrial and Commercial Ioniser

These all-bells-and-whistles units are designed for the more sophisticated hard-wired installations where budgets are a little more flexible i.e. larger indoor domestic pools and town houses, gymnasia and apartment pools.

They feature a robust lockable steel cabinet, an all-components PCB, fully programmable master timer, 2 timer-controlled primary outputs, flowswitch interlock, system monitoring via an all-functions LED display, voltage free contacts to facilitate PC monitoring of status and alarm.

Capacity

1,000 litres to 65,000 litres

Contact Aquavic Telephone/Fax: +61 3 9723 4223 or click here to email us. 2002–2017 Angus Horwood & Associates Pty Ltd. Site by Bunton Design